HP Onboard Administrator - Manual (Page 164)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 164
To verify that your Insight Remote Support configuration is correct, click Send Test Event to send a test event.
When the transmission is finished, the test event is listed in the Service Event Log.
Viewing the Service Event Log
The Service Event Log displays the following details for each service event.
Row Description
ID Number
A unique string that identifies the service event
Time Generated The time the service event was generated
Event Type Each event is classified with a type of either System or Test
Device Type A string that identifies the source of the event. Possible values are Fan, Power
Supply, Onboard Administrator, Interconnect, or Enclosure.
Serial Number A string that provides the serial number of the device that generated the event.
Bay The bay number of the device that generated the event.
Perceived Severity A string that indicates the severity of the event. The possible values are Critical
Error, Degraded, or Informational.
Submission Status The status of the event submission. Possible values are OK or ERROR.
Clearing the Service Event Log
To clear the Service Event Log, click Clear Event Log.
Insight Remote Support Data Collections
Data collection information
HP Direct Connect Remote Support
Row Description
Last Data Collection
Transmission
The date and time of the last successful data collection
Last Data Collection Status The transmission status; possible values are OK or Error