HP Onboard Administrator - Manual (Page 201)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 201
Row Description
System Event Health The internal System Event Health that the device is reporting. If the status is not OK,
examine the blade System Event Log on the iLO to determine the cause of the condition.
Possible values are OK, Degraded, or Failed.
Status The overall status of the blade. Possible values are Unknown, OK, Degraded, Failed, or
Other with an informational icon. The informational icon with an Other status displays
until the server blade is configured for Virtual Connect Manager. See the Diagnostic
Information table for further information.
Powered The power state of the blade. Possible values are On or Off.
Power Delay Remaining The number of seconds remaining before the device powers on.
Power Allocated
The amount of power allocated to the blade in watts.
Partner Device The storage/expansion blade the server blade is partnered with. This information does
not display if there is no partner device.
Virtual Fan The percentage of maximum RPM of the virtual fan.
Diagnostic Information
Row Description
Device Identification
Data Information such as model name, part number, serial number, and other information
used to identify the device is checked. This data is also referred to as FRU data. If the
data is not present or not readable by the Onboard Administrator, then a device
identification data error appears. Possible values are OK or Error.
Management Processor Status of the iLO. Possible values are OK or Error.
Temperature
Temperature is above the warning threshold. Possible values are OK or Temperature
Warning.