HP Onboard Administrator - Manual (Page 277)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 277
2. When prompted to accept a certificate:
o If you are using Internet Explorer 6, click View Certificate.
o If you are using Internet Explorer 7 or later, click Continue to this website (not recommended), and
then click Certificate Error in the top address bar. Click View Certificate.
3. Click the Details tab, and then click the Copy to File button.
4. From the list of export options, select Base-64 encoded x.509 (.CER). Provide a name and location for
the file, and finish the upload a certificate wizard.
5. Locate the exported certificate file, and then rename it with a .txt extension (for example, dccert.txt).
Open the file in a text editor, and then copy the entire contents to the clipboard. The following is an
example of an exported certificate file:
-----BEGIN CERTIFICATE-----
MIIFxDCCBKygAwIBAgIKJWUSwAAAAAAAAjANBgkqhkiG9w0BAQUFADBVMRMwEQYK
CZImiZPyLGQBGRYDY29tMRIwEAYKCZImiZPyLGQBGRYCaHAxFzAVBgoJkiaJk/Is
ZAEZFgdhdGxkZW1vMREwDwYDVQQDEwh3aW5kb3pDQTAeFw0wNjA4MjIyMDIzMTFa
Fw0wNzA4MjIyMDIzMTFaMCAxHjAcBgNVBAMTFXdpbmRvei5hdGxkZW1vLmhwLmNv
bTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEAy4zeh3iXydUAWKVHIDsxLJ6B
aRuVT9ZhkL5NQHIDeRjumsgc/jHSERDmHuyoY/qbF7JMhJ9Lh9QQHUg8QfEYsC1y
qTvgisrZeHtvmrmecvSxZm27b4Bj5XYN0VYcrwqKnH7X/tVhmwqGls7/YZyahNU1
lGB2OjoCq5eJxX+Ybx0CAwEAAaOCA00wggNJMAsGA1UdDwQEAwIFoDBEBgkqhkiG
9w0BCQ8ENzA1MA4GCCqGSIb3DQMCAgIAgDAOBggqhkiG9w0DBAICAIAwBwYFKw4D
…output truncated…
-----END CERTIFICATE-----
6. Return to the Onboard Administrator, paste the certificate contents into the window, and then click
Upload.
Directory Certificate Upload tab
This screen enables you to upload an LDAP certificate to the Onboard Administrator to establish a trusted
relationship with the LDAP server. You can upload a maximum of four certificates.
There are two methods for uploading certificates for use in HP BladeSystem Onboard Administrator:
• Paste certificate contents into the text field and click Upload.
• Paste the URL of the certificate into the URL field and click Apply.
Directory Test Settings tab
The Directory Test Settings tab provides Onboard Administrator administrators with a tool to ensure that the
configuration information provided allows the directory user access to the Onboard Administrator and the
resources in the enclosure. The Test Settings tab applies only to the current settings. Therefore, after making
changes, you must click the Apply button, and then select the Test Settings tab.
The Test Settings tab is used to run and report the tests to the administrator. When the page initially appears,
it contains a list of tests with the current status of Not Run. The tests are run in the order that they appear in
the table when you click the Test Settings button. The tests terminate when an error occurs. You must enter a
user name and password to perform the User Authentication and User Authorization tests.
The following tests are performed in the order listed.
Overall Test Status
The Overall Test Status is an aggregation of all the tests run. The value will either be Not Run, Passed, or
Failed. If any of the individual tests fail, the status is Failed.