HP Onboard Administrator - Manual (Page 133)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 133
Column Description
Enabled Enables EBIPA for IPv6 settings for the interconnect bay. EBIPA for IPv6 settings for all
interconnect bays can be enabled by selecting the check box next to Enabled in the
heading row or individual interconnect bays can be enabled by selecting the check
box for that particular interconnect bay.
EBIPA Address The fixed DHCP IPv6 IP address you want to assign to the interconnect bay. Possible
values are ####:####:####:####:####:####:####:####/###, where ####
ranges from 0 to FFFF. A compressed version of the same IPv6 address is also
supported. The prefix /### ranges from 0 to 128; the prefix length is mandatory.
Gateway The fixed gateway IPv6 address you want to assign for the interconnect bays. Possible
values are ####:####:####:####:####:####:####:#### where #### ranges
from 0 to FFFF. A compressed version of the same IPv6 address is also supported. Do
not specify a prefix. The gateway is assumed reachable from within the network.
Regardless of the type of IPv6 address specified, the server blade iLO and interconnect
GUI always display the Link-Local IPv6 address of the gateway. If no gateway exists at
the Link-Local IPv6 address, no gateway will be configured on the iLO and
interconnects.
Domain Domain name for the device bays. Possible values are a character string with a
maximum of 64 characters, including all alphanumeric characters, the dash (-), and the
period (.)
DNS Servers IPv6 addresses for primary, secondary, and tertiary DNS servers. Possible values are
####:####:####:####:####:####:####:####, where #### ranges from 0 to
FFFF. A compressed version of the same IPv6 address is also supported.
Autofill Assigns consecutive IPv6 addresses for the selected interconnect bays below in the
interconnect list. Click the Autofill down arrow to assign the IPv6 addresses.
Current Address The current IPv6 address of the interconnect bay.
To save the EBIPA for IPv6 settings for the interconnect bays, click Apply.
Device Summary
The FRU Summary section provides information on all field replaceable units within the enclosure.
Information provided in this section can quickly aid the administrator in contacting HP Customer Service for
troubleshooting, repair, and ordering replacements.
The information is organized in table format and divided into subcategories within the Device Summary
section:
• Enclosure
• KVM Module
• Onboard Administrators
• Blades
• Blade Mezzanines
• Interconnects
• Fans
• Power supplies