HP Onboard Administrator User Manual
Page 211
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 211
Row
Description
iLO Federation Capable Indicates whether the server blade is capable of iLO Federation.
This only indicates that the iLO is capable of being configured to participate in iLO
Federation. It does not indicate that the iLO is currently configured for actual
participation in iLO Federation. To fully enable iLO Federation, Enclosure iLO
Federation Support must be enabled on the Onboard Administrator (for more
information, see the Network Access (on page
) page) and each iLO must have the
appropriate firmware and be configured to support iLO Federation (for more
information, see the HP iLO 4 User Guide at the HP website
Processor IPv6 Information
Row
Description
Link Local Address
The link local IPv6 address of the iLO processor
Static Address
The static IPv6 address of the iLO processor
EBIPA Address
The EBIPA IPv6 address of the iLO processor
DHCPv6 Address
The DHCP IPv6 address of the iLO processor
SLAAC Address
The SLAAC IPv6 address of the iLO processor
iLO Remote Management
This section provides links to the requested iLO sessions.
When the IPv6 protocol is enabled, or FQDN link support is enabled, an IP address group box appears. This
group box allows you to select the IP address to be used for the links accessing the iLO sessions. If FQDN link
support is enabled and certain DNS configuration requirements are met, an FQDN-based address is the
default selection. For more information about enabling FQDN link support, see the "Network Access (on
)" page.
If you are trying to use a feature that requires popup window support and the feature does not work properly,
make sure your browser settings are not preventing popup windows from opening. For help with turning off
popup window blockers, see your specific browser help files.