HP Onboard Administrator - Manual (Page 61)

First Time Setup Wizard 61
Administrator Account Setup screen
The Administrator Account Setup screen initially displays the name of the active enclosure and the current
settings. If multiple enclosures were selected on the Enclosure Selection screen, a button is activated that
enables you to view separate inputs for each selected Onboard Administrator.
Field Possible value Description
Full Name
0 to 20 characters including all
alphanumeric characters, the
dash (-), the underscore (_),
and the space
The full name of the user
Contact 0 to 20 characters including all
alphanumeric characters, the
dash (-), the underscore (_),
and the space
Contact information for the user account. The
contact information can be the name of an
individual, a telephone number, or other useful
information.
Administrator Password 3 to 40 characters including all
printable characters
The password for the user account
Administrator Password
Confirm
3 to 40 characters including all
printable characters
Must match the Administrator Password value
Enable Insight Display PIN
protection Select or clear check box Select this check box to require a PIN code to be
entered to access the enclosure Insight Display.
PIN Code 1 to 6 characters from the
character sets 0 to 9, a to z,
and A to Z
The PIN code for the enclosure Insight Display
PIN Code Confirm 1 to 6 characters from the
character sets 0 to 9, a to z,
and A to Z
Must match the Insight Display PIN value
NOTE: When Onboard Administrator is operating in FIPS mode ON/DEBUG, the PIN
protection cannot be disabled.