HP Onboard Administrator - Manual (Page 291)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 291
Virtual Connect Manager
The Virtual Connect Manager link in the tree menu launches the Virtual Connect Manager in a new window.
To view available VCM address links (IPv4 and IPv6), click the down arrow alongside the link. When FQDN
link support is enabled and certain DNS configuration requirements are met, an FQDN-based address
displays as the default, as shown in the following figure. For more information about enabling FQDN link
support, see the "Network Access (on page 114 )" page.
For more information on using the Virtual Connect Manager, see the HP Virtual Connect Manager User
Guide.
iLO Integration
HP BladeSystem Onboard Administrator integrates with each server blade's iLO and enables for
pass-through authentication from Onboard Administrator. Like the CLI, HP BladeSystem Onboard
Administrator only supports a maximum of 4 users connected to the iLO at one time using pass-through
authentication. To connect to the server blade iLO port, click the iLO link. If the user account is set up on the
iLO and matches the user account on the Onboard Administrator, then the user will have access to the iLO
GUI which will be displayed in the same screen.