HP Onboard Administrator - Manual (Page 305)

Troubleshooting 305
59 Getting the enclosure information failed.
60 Getting the enclosure names failed.
61 Getting the enclosure status failed.
62 Setting the enclosure name failed.
63 Setting the enclosure asset tag failed.
64 Setting the enclosure time zone failed.
65 Setting the enclosure UID failed.
66 Setting the UID for the submitted interconnect failed.
67 Resetting the submitted interconnect failed.
68 Getting interconnect information for the submitted interconnect failed.
69 Getting interconnect status for the submitted interconnect failed.
70 An error occurred while accessing the connected user for the requested blade.
71 An error occurred while reading the lockfile for the submitted blade.
72 The submitted E-mail address is not valid.
73 Libem is not able to talk to iLO.
74 Downloading the submitted file failed.
75 The certificate could not be verified.
76 Could not save the authorization keys.
77 The SSH key size is not correct.
78 Could not ping the requested url.
79 Could not generate the CSR.
80 Could not generate the SSO
81 Could not read the fingerprint.
82 Could not get SSH key.
83 The field is already enabled.
84 The field is already disabled.
85 The system is already in DHCP mode.
86 The system is currently in static IP mode.
87 Could not clear the system log.
88 Could not restore the factory settings.
89 Could not read the configuration file.
90 Could not write to the configuration file.
92 The submitted url is not valid.
93 Could not update the firmware with the submitted image file.
94 Unable to acquire the rack topology.