HP Onboard Administrator - Manual (Page 189)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 189
• Enclosure Event 0x36: Inadequate Power or Cooling
• Enclosure Event 0x40: Interconnect Device Status Changed
• Enclosure Event 0x41: Interconnect Device Reset
• Enclosure Event 0x42: Interconnect Device UID Status Changed
• Enclosure Event 0x43: Interconnect Device Inserted
• Enclosure Event 0x44: Interconnect Device Removed
• Enclosure Event 0x45: Interconnect Device Information Changed
• Enclosure Event 0x46: Interconnect Device Health LED Status Changed
• Enclosure Event 0x47: Interconnect Device Thermal Status Changed
• Enclosure Event 0x48: Interconnect Device CPU Fault
• Enclosure Event 0x49: Interconnect Device Power Mode Changed
• Enclosure Event 0x50: Enclosure Demonstration Mode
• Blade Event 0x100: Blade Device Status Changed
• Blade Event 0x101: Blade Device Inserted
• Blade Event 0x102: Blade Device Removed
• Blade Event 0x103: Blade Device Power State Changed
• Blade Event 0x104: Blade Device Power Management Changed
• Blade Event 0x105: Blade Device UID Status Changed
• Blade Event 0x106: Blade Device Shutdown
• Blade Event 0x107: Blade Device Fault
• Blade Event 0x108: Blade Device Thermal Status Change
• Blade Event 0x110: Blade Device Information Changed
• Blade Event 0x111: Blade Bay Management Processor Changed
• Blade Event 0x112: ILO Ready
• Blade Event 0x114: Keying Error
• Blade Event 0x115: ILO Has IP Address
• LCD Event 0x200: Display Changed
• LCD Event 0x201: Button Pressed
• LCD Event 0x202: Pin Information Changed
• LCD Event 0x203: User Note Information Changed
• LCD Event 0x204: Chat Requested
• LCD Event 0x205: Chat Response Sent
• LCD Event 0x206: LCD Display State Changed
• Enclosure Event 0x1001: Network Information Changed
• Enclosure Event 0x1002: SNMP Information Changed
• Enclosure Event 0x1003: System Log Cleared