HP Onboard Administrator User Manual
Page 310
Troubleshooting 310
255 An undocumented error has occurred. Please update your firmware to the latest firmware version if
necessary. Contact HP if the problem persists.
256 This certificate is already mapped to another user.
257 The user certificate could not be verified.
258 This operation is not permitted when two-factor authentication is enabled.
260 This operation cannot be performed when AlertMail is disabled.
261 This operation cannot be performed when the AlertMail settings are not configured.
262 This operation cannot be performed when SNMP is disabled.
263 A certificate must be mapped to Administrator or LDAP must be enabled with a configured groups with
administrator privilege to enable two-factor authentication.
265 A certificate is not mapped to this user account.
266 Two-factor authentication is in effect.
267 Two-factor authentication configuration was not changed.
268 An iLO image is already staged.
269 The file was not a proper iLO image for the blade.
270 The crc32 supplied does not match the provided file.
271 Cannot delete the last CA with two-factor authentication enabled.
272 The Onboard Administrator cannot communicate with iLO.
273 An EBIPA configuration error occurred.
274 Link Loss Failover intervals must be between 30 and 86400 seconds.
275 Network speed must be either 10Mbit or 100Mbit.
276 Network duplex setting must be HALF or FULL.
277 The password does not conform to password rules.
278 Invalid minimum password value
279 A firmware image is already staged.
280 The provided file was not a proper image.
281 Bad image CRC checksum
282 Remote system logging must be enabled to perform this operation.
283 Invalid remote port. The port must be a number between 1 and 65535.
284 The remote syslog server address must be configured before enabling remote system logging.
285 Invalid remote server address
286 This setting is already enabled.
287 This setting is already disabled.
288 Enclosure IP mode was not enabled because the active Onboard Administrator does not have a static
IPv4 address.
289 This feature is not available for this Onboard Administrator.