HP Onboard Administrator - Manual (Page 222)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 222
Device bay port mapping table for c7000 enclosure
If a device is not present, the check box is disabled and the port cannot be viewed.
The server blades are mapped to the interconnect bays in the following manner. The terms 1x/2x or 4x refer
to the number of interconnect lanes per port provided by the controller. The more lanes provided per port, the
higher the data transmission rate coming from that port.
Half-height server blade
The following table lists the port mapping for half-height server blades installed in c7000 device bay N
(1-16).
Connection Port number Connects to
interconnect bay/port
Embedded NIC NIC 1
NIC 2 1/Port N
2/Port N
Mezzanine 1 Port 1
Port 2 3/Port N
4/Port N
Mezzanine 2 Port 1
Port 2
Port 3
Port 4
5/Port N
6/Port N
7/Port N+8
8/Port N+8
Full-height server blade
The following table lists the port mapping for full-height server blades installed in device bay N (1-8).
Connection Port number Connects to interconnect bay/port
Embedded NIC NIC 1
NIC 2
NIC 3
NIC 4
1/Port N+8
2/Port N+8
1/Port N
2/Port N
Mezzanine 1 Port 1
Port 2
Port 3
Port 4
3/Port N
4/Port N
3/Port N+8
4/Port N+8
Mezzanine 2 Port 1
Port 2
Port 3
Port 4
5/Port N
6/Port N
7/Port N
8/Port N
Mezzanine 3 Port 1
Port 2
Port 3
Port 4
7/Port N+8
8/Port N+8
5/Port N+8
6/Port N+8
Double dense server blade
The following table lists the available configurations for double dense devices installed in device bay N
(1-16).
Connection Port Number Connects to interconnect bay/port
Server A Embedded NIC NIC 1 (Port:1)
NIC 2 (Port:2)
1/Port N
3/Port N
Server A Mezzanine* Port 1
Port 2 5/Port N
6/Port N