Kenwood TS-990S User Manual
Page 180
9-12
9 TRANSMIT FUNCTIONS
5 Press [OK] (F4) to exit.
Note:
◆ The saved file is named with the year, month, day, hour, minute and
second. Also, the extension is ".equ".
Example: In the case of 30 seconds past 10:20, February 15, 2013,
the saved file name would look like: 20130215_102030.equ
◆ The name of the storage folder is as follows:
KENWOOD/TS-990/SETTINGS/TX_EQ
◆ You must remove a USB flash drive after executing the Safe
Removal of USB Flash Drive.
READING THE CONFIGURATION DATA FOR THE TX
DSP EQUALIZER
You can read the configuration data for the TX DSP
equalizer from a USB flash drive.
REV
[F1] [F7]
[TXEQ/SEL]
[ESC]
[MULTI/CH]
[USB]
1 Press and hold [TXEQ/SEL] to open the TX Equalizer
screen.
2 Insert a USB flash drive, for which data files have been
saved, into the
(USB-A) connector.
Once the USB flash drive is distinguished, the "
" icon
appears at the center top of the main screen.
3 Press [
] (F2) or [
] (F3), or rotate the
MULTI/CH control to select the type of equalizer to
which configuration data read from a USB flash drive
will be applied.
4 Press [READ] (F6) to open the File (TX EQ) screen.
• The File (TQ EQ) screen appears.
• Pressing [CANCEL] (F7) returns you to the TX Equalizer
screen without selecting the configuration data.
• Pressing [DELETE] (F6), a message prompting you to
ensure the deletion of the file appears. Pressing [OK] (F4)
deletes the file.
• Pressing [NAME] (F5) enables you to rename the
configuration data.