Kenwood TS-990S - Manual (Page 211)

VOICE MESSAGE AND AUDIO FILE 13
13-9
Index Contents
5 Use function keys, the MULTI/CH control, or a USB
keyboard to enter the name.
[SPACE] (F1): Press to enter a space.
[-] (F2) and [+] (F3): Press to display the previous or next
character.
[
] (F4)/[ ] (F5): Press to move the pointer.
[SAVE] (F6): Press to save the edited characters.
[BACK SPACE] (F): Press to delete a character on the left
side of the pointer.
[CHAR] (F): Press to change the character type. Each time
you press [CHAR] (F), the character type cycles through the
following sequence:
ABC (upper case) > abc (lower case) > ÀÁÂ (upper case) >
àáâ (lower case) > !”# (symbols) > ABC (upper case)
6 Press [SAVE] (F6) to save the file name.
Press [CANCEL] (F7) to discard the text string entered and
end entering the audio file name.
7 Press [ESC] to exit.
Note:
◆ Prior to removing a USB flash drive, be sure to execute "Safe
Removal of the USB Flash Drive" {page 12-1}
DELETING AN AUDIO FILE
You can delete an audio file saved in internal memory or
USB flash drive.
To use a USB flash drive, insert a USB flash drive in
(USB-A) and be sure that the transceiver has recognized
the USB flash drive.
1 Press [RX PLAY] (F1) to open the Audio File screen.
2 Press [INT.MEM] (F7) or [USB MEM] (F7) to alternate
the screen.
• Press [INT.MEM] (F7) to open the Audio File (Internal)
screen.
• Press [USB MEM] (F7) to open the Audio File (USB)
screen.
• If [INT.MEM] (F7) or [USB MEM] (F7) is unavailable in the
function key guide, press [MORE] (F1). An alternate key
guide will appear.
• If the Audio File (USB) screen appears with a press of
[USB MEM] (F7), pressing [FOLDER] (F1) to switch the
folder to refer to the file recorded with the timed task stored
in the TIMER_REC folder and other files are stored in the
RX_REC folder.
3 Press [ ] (F2) or [ ] (F3), or rotate the
MULTI/CH control to select an audio file to be deleted.
4 Press [DELETE] (F6).
A message prompting you to delete an audio file appears.
5 Press [OK] (F4) to delete an audio file.
Press [CANCEL] (F7) to revert to the Audio File screen
without deleting an audio file.
6 Press [ESC] to exit.
Note:
◆ You cannot delete an audio file that is protected.
◆ Prior to removing a USB flash drive, be sure to execute "Safe
Removal of the USB Flash Drive" {page 12-1}