Kenwood TS-990S - Manual (Page 234)

16 USEFUL FUNCTIONS
16-2
Index Contents
CONFIGURING THE SCREEN SAVER WAIT TIME
You can configure the length of time from when you
operate the transceiver last until the time when the screen
saver activates.
1 Select Group No. 0, "Basic Configurations", from the
Menu screen.
2 Access Menu 05, "Screen Saver Wait Time".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5), or rotate the MULTI/CH
control to configure the wait time until the screen saver
will be activated.
You can select from "Preview [5 sec]" (displaying the screen
saver for five seconds to preview), "5 [min]", "30 [min]", or "60
[min]".
5 Press [ ] (F1).
6 Press [MENU] to exit.
CONFIGURING THE TEXT STRING FOR
SCREEN SAVER
You can configure the text string if you select Type 2 for
the Screen Saver. While the screen saver is active, the
entered text string moves freely across the main screen
and the sub-screen.
1 Select Group No. 0, "Basic Configurations", from the
Menu screen.
2 Access Menu 06, "Screen Saver Message".
3 Press [EDIT] (F4) to allow editing of the parameter box.
4 Use the function keys and the MULTI/CH control to edit
or enter a text string.
You can enter a maximum of 10 characters.
[SPACE] (F1): Press to enter a space.
[-] (F2)/[+] (F3): Press to display the previous character or
the next character.
[
] (F4) and [ ] (F5): Press to move a pointer to
the left or right.
[BACKSPACE] (F): Press to delete the character to the left of
the cursor.
[CHAR] (F): Press to delete the character to the right of the
cursor.
[CHAR] (F): Press to change the character type. Each time
you press [CHAR] (F), the character type cycles through the
following sequence:
ABC (upper case) > abc (lower case) > ÀÁÂ (upper case) >
àáâ (lower case) > !”# (symbols) > ABC (upper case)
5 Press [SAVE] (F6) to save the text string.
6 Press [MENU] to exit.