Kenwood TS-990S - Manual (Page 205)

VOICE MESSAGE AND AUDIO FILE 13
13-3
Index Contents
You can do the following operations while playing a voice
message.
Operation Action
Hold down [FF▶▶] (F6).
Fast forwards the voice message.
Release the key to return to normal play
speed.
Hold down [◀◀REW] (F2). Fast rewinds the voice message. Release
the key to return to normal play speed.
Press [||PAUSE] (F3). Pauses the voice message.
Press [▶PLAY] (F3) while
paused
Resume the play from the paused location.
Press [■STOP] (F4). Stops the voice message.
Press [ESC].
The Voice Message screen closes and
playing of the voice message ends.
ADJUSTING THE VOLUME OF VOICE MESSAGE
You can adjust the volume to play a voice message.
1 Select Group No. 1, "Audio Performance", from the
Menu screen.
2 Access Menu 01, "Voice Message Volume (Play)"
3 Press [SELECT] (F4) to enable editing of the
parameter box.
4 Press [–] (F4) or [+] (F5) to select "Off", the volume
level from "1" to "20".
The volume increases as the number increases. Select "Off"
to mute the voice message. The default is "10".
5 Press [ ] (F1).
6 Press [MENU] to exit.
TRANSMITTING A VOICE MESSAGE
You can transmit the recorded voice message while
playing.
[ ESC ] [ F1] [F7 ]
1 Press a mode key to select SSB, FM, or AM mode.
2 Press [TX MSG] (F2) to open the Voice Message
screen.
3 Press the function key ([CH1] (F2) to [CH6] (F7)) to be
recorded to which the voice message channel number
is assigned.
• If [CH1] (F2) to [CH6] (F7) are unavailable in the function
key guide, press [MORE] (F1). An alternate key guide will
appear.
• The Voice Message Play screen opens and the voice
message is transmitted.
You can do the following operations while playing a voice
message.
Operation Action
Press [REPEAT] (F5).
Starts transmitting and the voice message is
played repeatedly. Pressing [REPEAT] (F5)
again stops the repeated play and reverts to
the receive mode.
You can configure the interval time
to repeatedly transmit the voice
message. {page 13-4}
Press [■STOP] (F4).
Stops the transmission of a voice message and
exits the Voice Message screen.
Press [ESC].
The Voice Message screen closes and playing
of the voice message ends.