Kenwood TS-990S - Manual (Page 228)

15 CLOCK DISPLAY AND TIMER
15-4
Index Contents
ENABLING OR DISABLING THE AUTOMATIC TIME
CORRECTION
Automatic Time Correction enables automatic
communications to the NTP Server to correct the date and
time configured for transceiver clocks.
1 Press [CLOCK] (F) from the Menu screen to open the
Clock screen.
2 Access Menu 01, "Automatic Time Correction".
3 Press [SELECT] (F4).
4 Access Menu 00, "Clock Correction using the NTP
Server".
5 Press [SELECT] (F4) to allow editing of the parameter
box.
6 Press [-] (F2) or [+] (F3) to select "On" or "Off" of the
automatic time correction.
Selecting "On" allows the transceiver to automatically
communicate, when the transceiver power is turned On ( ),
to the NTP server to correct the date and time of the clocks. If
the transceiver power ( ) remains turned ON, it corrects the
date and time every 24 hours. The default is "Off".
7 Press [ ] (F1).
8 Press [MENU] to exit.
Note:
◆ The transceiver acquires the time information from the NTP service
when the transceiver power ( ) is turned On or every 24 hours
during continued operation.
◆ You must ensure that all configurations associated with the NTP
server have been done and you can manually correct the clock with
an access to the NTP server, prior to enabling the automatic time
correction for first time.
MANUAL CLOCK CORRECTION
You can connect the transceiver to the NTP Server
as desired to correct the date and time configured for
transceiver clocks.
1 Press [CLOCK] (F) from the Menu screen to open the
Clock screen.
2 Access Menu 01, "Automatic Time Correction".
3 Press [SELECT] (F4).
4 Press [UPDATE] (F6) to correct the time.
The transceiver begins to communicate to the NTP server,
and the date and time configured for the transceiver will be
corrected. After the correction has completed, a message
notifying you of the end of communications with the NTP
server appears.
5 Press [MENU] to exit.
Note:
◆ Avoid frequent access to the NTP server to manually correct the
time.
TIMER
The transceiver is equipped with a timer, allowing you
to use a timed task with one of the following timers. In
the Programmable Timer screen, frequencies and the
operating mode displayed on the main band and the sub
band can instantly be copied.
Power On (Programmable Timer)
With the transceiver power ( ) turned OFF, the timer task
turns the transceiver power ( ) ON at the configured time.
Power Off (Programmable Timer)
With the transceiver power ( ) turned ON, the timer task
turns the transceiver OFF at the configured time.
Power On and Power Off (Programmable Timer)
The timed task configured for Power On and Power Off
can be reserved.
Timed Recording (Programmable Timer)
The transceiver stores the received audio onto the USB
flash drive during the time between the time configured for
Power-on and the time configured for Power-off.
Sleep Timer (Timer)
The transceiver power ( ) turns OFF after the configured
time lapse.
APO (Automatic Power Off) (Menu 0-33)
If a key or control is not operated until the configured time
elapses, the transceiver power ( ) turns OFF.