Kenwood TS-990S - Manual (Page 37)

PANEL DESCRIPTION 2
2-11
Index Contents
MAIN SCREEN
Area Display Description Ref. Page
A
Displays the antenna number. The antenna number changes when you change the antenna.
Disappears when the transmit signal is sent through the DRV connector to a transverter.
{page 4-20}
Appears while the antenna dedicated for reception is active. {page 4-21}
Appears if "-6 dB", "-12 dB" or "-18 dB" has been selected for the reception attenuator. {page 6-1}
P.AMP Appears while Receive Preamplifier is active. {page 5-9}
Appears while Noise Reduction 1 (NR1) is active.
Appears while Noise Reduction 2 (NR2) is active.
{page 6-13}
Appears while Noise Blanker 1 (NB1) is active.
Appears while Noise Blanker 2 (NB2) is active.
Appears while Noise Blanker 1 (NB1) and Noise Blanker 2 (NB2) are active.
{page 6-9}
Appears while the internal antenna tuner is active.
" " blinks while in tuning.
{page 4-21}
Appears while an external antenna tuner or the internal antenna tuner for RX is active.
" " and " " blinks while tuning.
{page 4-21}
Appears while a transverter is active. {page 16-33}
TX TUNE Appears and disappears alternately while TX Tuning is active. {page 9-13}
Displays the transmit power level. Disappears when the transmit signal is sent through the DRV
connector.
{page 4-17}
B 30WPM
Displays the keying speed. When rotating the KEY SPEED control, displays the keying speed
value (4 to 60 words per minute) in the TX display for two seconds.
{page 5-19}
Displays the date for the local clock. You can select the display format from the English, US and
Japanese.
{page 15-1}
Displays the clock in the 24-hour format.
Left: Displays the time for the local clock.
Right: Displays the time for the second clock ("U" is added to the end of the second clock).
{page 15-1}
Starts blinking when a USB flash drive is connected and lights after the transceiver recognizes the
USB flash drive.
{page 12-1}
Appears while RIT is active. {page 5-13}
Appears while XIT is active. {page 5-13}
Ⓐ Ⓑ Ⓒ
Ⓓ
Ⓔ
Ⓕ
Ⓖ
Ⓗ
Ⓘ
Ⓙ
Ⓐ