Kenwood TS-990S - Manual (Page 29)

PANEL DESCRIPTION 2
2-3
Index Contents
y TX (Main band) key: [TX] (M)
Press to switch Split mode to Simplex mode. {page 5-1}
"TX" (Main band) LED
Lights green while in Simplex mode.
{page 5-1}
z Main to Sub key: [M▶S]
Press to copy the main band frequency and mode
configuration data to the sub band. {page 5-1}
A Tuning (M) control
Rotate to select transmit and receive frequencies for
the selected band. Rotating it clockwise increments the
frequency and rotating it counterclockwise decrements the
frequency. The rotation torque for the Tuning control can be
adjusted.
B Sub-screen
A 3.5" Color TFT LCD. {page 2-14}
C
Function keys: [x.x.x] (F) with Key Guide on the right
side of Main Screen
Press to activate or select the function specified with a key
guide on the right side of the main screen.
D Main Screen
A 7" Color TFT LCD. {page 2-11}
E
MAIN BUSY/ TX LED
Lights red during transmit using the main band. Lights green
while the main band squelch is open.
F
SPLIT LED
Lights yellow while in the Split mode. Blinks yellow while the
split frequency is being entered.
G Main Band and Sub band key: [M/S]
Press to toggle the frequency and operating mode between
main band and sub band. {page {page 5-36}}
H SUB BUSY/ TX LED
Lights red during transmit using the sub band. Lights green
while the sub band squelch is open.
I RX (Sub band) key: [RX] (S)
Press to toggle reception on the sub band between active
and inactive. {page 5-3}
"RX" (Sub band) LED
Lights green while the sub band is in receive mode.
J TX (Sub band) key: [TX] (S)
Press while in Simplex mode to switch the operating
mode to Split mode. Press again to reverts to Simplex
mode. {page 5-1}
Press and hold to enable the configuration for split frequency
operation. {page 5-1}
"TX" (Sub band) LED
Lights green while the transceiver is placed in Split operation.
K TX Frequency Set key: [TF-SET]
Press down to receive using the transmit
frequency. {page 5-2}
L CW Auto Tune (Main Band) key: [CW T.] (M)
Press to activate CW auto tuning for the main
band. {page 5-17}
M Fine Tuning (Main Band) key: [FINE] (M)
Press to toggle Fine tuning for the main band between active
and inactive. {page 4-14}
N Voice (Main Band) key: [VOICE] (M)
Press to activate the function assigned to [VOICE] (M). The
default is "VOICE 1" for the main band. {page 14-3}
O Lock (Main Band) key: [LOCK] (M)
Press to toggle the main band frequency lock between active
and inactive. {page 4-16}
"LOCK" (Main) LED
Lights orange while the frequency lock for the main band is
active. {page 4-16}
P
Filter (Main Band) key: [FIL/SEL] (M)
Press to cycle the receive filter for the main band through
Filter A, Filter B and Filter C. {page 6-2}
Press and hold to open or close the Receive Filter
screen. {page 6-3}
REV