Kenwood TS-990S - Manual (Page 8)

PRIOR TO YOUR FIRST QSO
VI
Index Contents
■ SCREEN AND MESSAGES
Information that appears on the main screen after pressing
the MENU key or by a long press of any particular key is
described as the "screen". A text string (mainly in a message
box) navigating your operation or notifying you of an error is
described as a "message".
■ AUDIBLE OPERATION AIDS
This transceiver assists your operation with a beep upon
a key press and the use of voice guidance. Configuration
methods for those audible operation aids are described in
this manual.
■ FRONT PANEL ILLUSTRATION ONLY FOR [MENU]
AND [X.X.X] (F1) TO [X.X.X] (F7)
In this manual, due to availability of space, the front panel
illustration which indicates locations only of [MENU]
and [X.X.X] (F1) to [X.X.X] (F7) is exempted. When you
read this manual for the first time, you must note the
locations of the [MENU] and [X.X.X] (F1) to [X.X.X] (F7)
keys. {page 2-7} {page 2-11}
[F1] [F7]
[MENU]
■ IDENTICAL KEY OPERATION ON THE FRONT
PANEL
There are several methods of key operations to select a
parameter while the parameter box in the menu screen,
sub-menu screen, or configuration screen allows your entry
of the parameter. This manual describes operation methods
using the function keys; however, the operations below are
identical.
• Press [
] (F2) or [ ] (F3).
• Press [-] (F4) or [+] (F5).
• Press [UP] or [DOWN].
• Rotate the MULTI/CH control.
[ESC] [F1] [F7]
F[RESET]
F[CLOCK] F[LAN]
F[USB DRIVE]
F[ADV.] [MENU]
[UP]
[＜MAIN ] [SUB＞]
[DOWN]
[MULTI/CH]
■ NOTATION FOR KEYS, CONTROLS AND DISPLAYS
In this manual, each key, control, and display are described.
Notation Example Overview
[x.x.x]
[CW/CW-R]
[M>S] (M)
Keys located on the front panel
The X.X.X
control
The MULTI/CH
control
The NB 1 (M)
control
Controls located on the front panel
The Tuning
control
The Tuning (M)
control
The Tuning (S)
control
The Tuning controls located on the
front panel
The "x.x.x"
LED
The "MAIN BUSY/
TX" LED
The "MONI/SEL"
LED
LEDs located on the front panel or on
the keys with the front panel
The X.X.X
connector
The ACC 2
connector
Connectors, jacks and ports located on
the front and rear panels
The x.x.x
screen
The Menu screen
The Bandscope
screen
Screens that appear on the main
screen to configure or select a
parameter.
"x.x.x"
"FSK"
"Off"
What appears on the main screen
and the sub-screen, or a selected
parameter from the parameter box.
[X.X.X] (F) [ATT -12dB] (F)
Function keys corresponding to the key
guide along the right side of the main
screen.
The task name displayed on a key
guide appears in brackets. This task
name (key guide) may vary from
screen to screen.
[X.X.X] (F1
to F7)
[(RESET)]
[MODE] (F7)
Function keys corresponding to the
key guide along the bottom of the main
screen.
The task name displayed on a key
guide appears in brackets. This task
name (key guide) may vary from
screen to screen.