Connecting to your lan, Connecting to your lan -9 – Kenwood TS-990S User Manual
Page 23
Advertising
1-9
INSTALLING AND CONNECTING THE TRANSCEIVER 1
CONNECTING TO YOUR LAN
To connect the transceiver to your LAN so as to automatically correct the clock or to operate with KNS (KENWOOD
NETWORK COMMAND SYSTEM), use an Ethernet cable (straight type) as shown in the illustration below.
Note:
◆ Use a commercially available Ethernet cable.
TS-990S
Internet
Service Provider and Carrier
Ethernet Cable
(Straight Type)
Broadband Router or Hub
PC 1
Radio Control Program ARCP-990
PC 2
Radio Host Program
ARHP-990
Advertising