Kenwood TS-990S - Manual (Page 204)

13 VOICE MESSAGE AND AUDIO FILE
13-2
Index Contents
NAMING A VOICE MESSAGE
You can name a recorded voice message.
1 Press a mode key to select SSB, FM, or AM mode.
2 Press [TX MSG] (F2) to display the Voice Message
screen, press [ ] (F2) or [ ] (F3), or
rotate the MULTI/CH control to select a channel for
which a voice message will be named.
If [ ] (F2) or [ ] (F3) is unavailable in the
function key guide, press [MORE] (F1). An alternate key
guide will appear.
3 Press [NAME] (F6) to enable editing of the voice
message name.
4 Use function keys, the MULTI/CH control, or a USB
keyboard to enter the text string for naming.
[SPACE] (F1): Press to enter a space.
[-] (F2)/[+] (F3): Press to display the previous or next
character.
[
] (F4)/[ ] (F5): Press to move the pointer.
[BACK SPACE] (F): Press to delete a character on the left
side of the pointer.
[DEL] (F): Press to delete a character on the right side of the
pointer.
[CHAR] (F): Press to change the character type. Each time
you press [CHAR] (F), the character type cycles through the
following sequence:
ABC (upper case) > abc (lower case) > ÀÁÂ (upper case) >
àáâ (lower case) > !”# (symbols) > ABC (upper case)
5 Press [SAVE] (F6) to save the voice message name.
Press [CANCEL] (F7) to discard the text string entered and
end editing process of the voice message name.
6 Press [ESC] to exit.
PLAYING A VOICE MESSAGE
You can play the recorded voice message.
[ ESC ] [ F1] [F7 ]
1 Press a mode key to select SSB, FM, or AM mode.
2 Press [TX MSG] (F2) to open the Voice Message
screen.
3 Press [ ] (F2) or [ ] (F3), or the MULTI/
CH control to select the voice message channel to be
played.
If [ ] (F2) or [ ] (F3) is unavailable in the
function key guide, press [MORE] (F1). An alternate key
guide will appear.
4 Press [PLAY] (F4) to play a voice message.
The Voice Message Play screen opens.