Kenwood TS-990S - Manual (Page 48)

3 MENU
3-6
Index Contents
TX/RX Filter & Misc. (Group 6)
Menu Display Configuration Range Default
Reference
Page
Message
6-00 Playback Time (Full-time Recording) Playback time for the full-time recording
Last 10 [s], Last 20 [s], Last 30
[s]
Last 30 [s] 13-5
6-01 Recorded Audio File Storage Location Location of holder where the recorded files
will be stored
Internal, USB Internal 13-4
Transmit Management
6-02 Time-out Timer
Maximum continuous transmit time (time-
out timer)
Off, 3, 5, 10, 20, 30 [min] Off 9-14
6-03 TX Inhibit Transmit inhibit Off, On Off 16-27
6-04 Transmit Power Step Size
Step size in W to increment or decrement
the transmit power
1 or 5 [W] 5 W 4-17
Filter
6-05 TX Filter Numbers The number of transmit filters 2, 3 3 9-8
6-06 RX Filter Numbers The number of receive filters 2, 3 3 6-3
6-07
Filter Control in SSB Mode (High/Low
and Shift/Width)
Toggling the filter type between the
high-cutoff and the low-cutoff, and the
frequency type between the width and the
shift for use in SSB mode.
High & Low Cut, Shift &Width
High & Low
Cut
6-4
6-08 Filter Control in SSB-DATA Mode (High/
Low and Shift/Width)
Toggling the filter type between high-cutoff
and low-cutoff, and the frequency type
between width and shift for use in SSB-
DATA mode.
High & Low Cut, Shift &Width Shift & Width 6-5
6-09 VOX Voice Delay (Microphone)
Voice Delay Time (Microphone) while the
VOX is active
Off, Short, Medium, Long Medium 9-5
6-10 VOX Voice Delay (Except Microphone) Voice Delay Time (other than for the
microphone line) while the VOX is active
Off, Short, Medium, Long Medium 9-5
Rear Connectors (Group 7)
Menu Display Configuration Range Default
Reference
Page
Baud Rate
7-00 Baud Rate (COM Port) Baud Rate for the COM connector
4800, 9600, 19200, 38400,
57600, 115200 [bps]
9600 [bps] 16-10
7-01 Baud Rate (USB Port) Baud Rate for the USB port
4800, 9600, 19200, 38400,
57600, 115200 [bps]
115200 [bps] 16-10
Data Transfer
7-02 Quick Data Transfer Quick Data Transfer Off, On Off 16-26
7-03 Overwrite Location (Quick Data Transfer) The location where the split operation
status is overwritten
VFO, Quick Memory
Quick
Memory
16-26
7-04
Overwrite Location (DX PacketCluster
Tuned Data)
The location where the packet cluster
tuned data is saved
Operating Band, Sub Band Sub Band 16-27
Audio Input
7-05 USB: Audio Input Level Input level of the USB audio 0 to 100 (in steps of 1) 50 16-21
7-06 ACC 2: Audio Input Level Input level from the ACC2 connector 0 to 100 (in steps of 1) 50 16-20
7-07 Optical: Audio Input Level
Input level for the audio signal from the
OPTICAL IN connector
0 to 100 (in steps of 1) 50 16-19
Audio Output
7-08 USB: Audio Output Level (Main Band)
Output level of the main band audio signal
from the USB connector
0 to 100 (in steps of 1) 100 16-21
7-09 USB: Audio Output Level (Sub Band)
Output level of the sub band audio signal
from the USB connector
0 to 100 (in steps of 1) 100 16-21
7-10 ACC 2: Audio Output Level (Main Band) Output level of the main band audio signal
from the ACC 2 connector
0 to 100 (in steps of 1) 50 16-20
7-11 ACC 2: Audio Output Level (Sub Band) Output level of the sub band audio signal
from the ACC 2 connector
0 to 100 (in steps of 1) 50 16-20
7-12 Optical: Audio Output Level (Main Band) Output level of the main band audio signal
from the OPTICAL OUT connector
0 to 100 (in steps of 1) 100 16-19
7-13 Optical: Audio Output Level (Sub Band) Output level of the sub band audio signal
from the OPTICAL OUT connector
0 to 100 (in steps of 1) 100 16-19