Kenwood TS-990S - Manual (Page 222)

14-10
14 VOICE GUIDANCE
Index Contents
VOICE 2
When a key to which "Voice 2" is assigned is pressed, the
values of S meter and power meter are announced. For
example, announced as "S5" or "20 dB".
[PF A]
1 Press the PF key to which [PF A] or Voice 2 is
assigned
Values of S meter and power meter are announced.
Note:
◆ Pressing again during the announcement the PF key, to which
"Voice 2" is assigned, stops the announcement.
◆ Refer to "PF (Programmable Function)" to change the PF key to be
assigned. {page 16-6}
◆ When transmitting in the sub band, the value of main band power
meter is announced.
The following contents are announced by Voice 2.
S meter
Power meter
TS-990S
Level
Announced
Content
Level
Announced
Content
0 S 0 0 P 0
1 to 4 S 1 1 to 4 P 5
5 to 8 S 2 5 to 8 P 10
9 to 12 S 3 9 to 16 P 25
13 to 16 S 4 17 to 24 P 50
17 to 20 S 5 25 to 30 P 75
21 to 24 S 6 31 to 36 P 100
25 to 28 S 7 37 to 42 P 125
29 to 32 S 8 43 to 48 P 150
33 to 36 S 9 49 to 54 P 175
37 to 41 10 dB 55 to 60 P 200
42 to 47 20 dB 61 to 64 P 225
48 to 52 30 dB 65 to 70 P 250
53 to 58 40 dB - -
59 to 64 50 dB - -
65 to 70 60 dB - -
VOICE 3
Press the PF key, to which "Voice 3" is assigned, to
announce the value of the meter.
[PF B]
1 Press the key to which [PF B] or Voice 3 is assigned.
The value of the meter when the key was pressed is
announced.
Note:
◆ Pressing again during the announcement the PF key, to which
"Voice 3" is assigned stops the announcement.
◆ Refer to "PF (Programmable Function)" to change the PF key to be
assigned. {page 16-6}
◆ The value of the digital meter is announced even when [VOICE3] is
pressed while an analog meter is displayed.
◆ If the power meter is displayed while an analog meter or digital
meter is displayed, the value of the power meter is announced by
pressing [VOICE3].
◆ Pressing [VOICE3] while a voice message is on the midway to start
recording or while the Microphone Gain is being adjusted using
Advanced Menu 13 emits the readout of the level meter (FM).