Kenwood TS-990S - Manual (Page 216)

14-4
14 VOICE GUIDANCE
Index Contents
The following announcements are made upon a press of [VOICE] (M) or [VOICE] (S). The announced content differs
depending on the screen being displayed.
Screen Operation/Status Announced Content
Auto Mode
To display a screen "Auto" + frequency on the top of the list + Mode
When [VOICE1] is pressed "Auto" + Operating frequency
Focus shift Frequency + Mode
Copying a frequency to list "Copy" + Frequency + Mode
Switching On/Off "Auto" + (On/Off)
ANT name
When the screen opens or
[VOICE1] is pressed
"Antenna Name" + number
Focus shift Number
Displaying the Antenna Name
Entry screen
"Edit"
Preselector
When the screen opens or
[VOICE1] is pressed
"Preselector" + Value (–20 to +20)
Shift Value (–20 to +20)
Aligning with center "Center" + Value (0)
AGC
When the screen opens or
[VOICE1] is pressed
"AGC" + (Fast/Middle/Slow) + Value
"AGC" + "Off"
Changing a value Value
Switching the AGC speed (Fast/Middle/Slow) + Value
AGC copy
When the screen opens or
[VOICE1] is pressed
"Copy" + "OK?"
AGC disabled
When the screen opens or
[VOICE1] is pressed
"AGC" + "Off" + "OK?"
Equalizer
When the screen opens or
[VOICE1] is pressed
(RX/TX) + "Equalizer" + (HB1/HB2/FP/BB1/BB2/F/C/U1/U2/U3)
Focus shift (HB1/HB2/FP/BB1/BB2/F/C/U1/U2/U3)
Equalizer configuration
When the screen opens or
[VOICE1] is pressed
(RX/TX) + "Equalizer " + "Adjust"
Focus shift
(0/0.3/0.6/0.9/1.2/1.5/1.8/2.1/2.4/2.7/3.0/3.3/3.6/3.9/4.2/4.5/4.8/5.1)
+ (+/-) + "dB", or "0 dB"
Changing a value (+/-) + Value + "dB" (does not announce "plus minus" in the case of 0 dB)
Initializing No announcement
Copying the equalizer
configuration
When the screen opens or
[VOICE1] is pressed
"Copy" + "OK?"
Reading the equalizer data
When the screen opens or
[VOICE1] is pressed
"Read" + "OK?"
Reading a file
When the screen opens or
[VOICE1] is pressed
"File list" + "RX" + "Equalizer"
When the screen opens or
[VOICE1] is pressed
"File list" + "TX" + "Equalizer"
When the screen opens or
[VOICE1] is pressed
"File list" + "Data"
Focus shift Year + Month + Date + Time
When the screen opens or
[VOICE1] is pressed
"Clear" + "OK?"
Editing a name "Edit"
Selecting the data block to
be read (DATA)
When the screen opens or
[VOICE1] is pressed
"Read" + "Data" + "Select"
Focus shift
(Environment dependent)
"ENV" + (On/Off)
Focus shift (CW) "CW message" + (On/Off)
Focus shift (Recording)
"Record" + "Message" + (On/Off)
"Message" + "Record" + (On/Off)
Focus shift (Voice Message) "Voice Message" + (On/Off)
Switching On/Off (On/Off)
Processing
When the screen opens or
[VOICE1] is pressed
"Please wait"
(No voice guidance while reading using RXEQ and TX EQ)
Data load complete
When the screen opens or
[VOICE1] is pressed
"Completed"
Verify data save (RXEQ)
When the screen opens or
[VOICE1] is pressed
"Save" + "OK?"
Saving the data
When the screen opens or
[VOICE1] is pressed
"Completed"