INFICON MDC-260 Thin Film Deposition Controller - Manual (Page 23)

MDC-260 DEPOSITION CONTROLLER
GENERAL DESCRIPTION 1-5
The MDC-260 also has a built in material library that contains many common
material names along with their density and acoustic impedance values.
1.3.7 INPUT/OUTPUT CAPABILITY
Sensor Inputs 2 BNC inputs
Source Outputs 2 fully isolated, 2.5, 5, 10 volts @ 20
ma. 0.002% resolution
Discrete Inputs 8 fully programmable inputs, user
selectable ground true (Passive) or 12
to 120 volt AC/DC (Active).
Discrete Outputs 8 fully programmable outputs, SPST
relay, 120VA, 2A max.
Abort Output 1 SPST Relay, 120VA, 2A max.
Remote Power Handset Front panel, RJH jack
USB 1.1 Communication USB “B” connectors on both front
and rear panel
1.3.8 SENSOR PARAMETERS
Number of Crystals 1 to 16
Shutter Relay Type Normally open, normally closed, dual,
or none
Position Control Manual, direct, BCD, or individual
Position Drive Up, down, Fast, inline, single step, or
double step
Feedback Type Individual, BCD, single home, in
position, or no feedback
Rotator Delay 0 to 99 sec