Lenze EVS9332xS - Manual (Page 9)

Preface and general information
How to use this System Manual
1.1.1 Information provided by the System Manual
1−3
l
EDSVS9332S−EXT EN 2.0
1.1 How to use this System Manual
1.1.1 Information provided by the System Manual
Target group
This System Manual addresses to all persons who dimension, install, commission, and set 9300
servo inverters.
Together with the System Manual, document no. EDSVS9332S, and the catalogue, it forms the basis
for project planning for the manufacturer of plants and machinery.
Contents
The System Manual (Extension) completes the System Manual, document no. EDSVS9332S:
l The features and functions are described in detail.
l It describes additional possible applications in detail.
l Examples describe how to set the parameters for typical applications.
l In case of doubt always the mounting instructions supplied with the 9300 servo inverter are
valid.
Contents of the System Manual Contents of the System Manual (Extension)
1 Preface 1 Preface
2 Safety −
3 Technical data −
4 Mounting the standard device −
5 Wiring the standard device −
6 Commissioning −
7 Parameter setting −
8 Configuration 2 Configuration
8.1 Monitoring 2.1 Configuration with Global Drive Control
8.2 Monitoring functions 2.2 Basic configurations
8.3 Code table 2.3 Modes of operation
8.4 Selection lists 2.4 Change of the terminal assignment
8.5 Table of attributes
− 3 Function library
− 4 Application examples
9 Troubleshooting and fault elimination −
10 DC−bus operation −
11 Safe standstill −
12 Accessories −
13 Appendix 5 Appendix