Upgrade firmware – Rockwell Automation 2097-Vxxx Kinetix 350 Single-axis EtherNet/IP Servo Drive User Manual User Manual
Page 146
Advertising
146
Rockwell Automation Publication 2097-UM002C-EN-P - December 2013
Appendix B Upgrade the Kinetix 350 Drive Firmware
Upgrade Firmware
Follow these steps to select the drive module to upgrade.
1. Open your ControlFLASH software.
You can access the ControlFLASH software by either of these methods:
• In RSLogix 5000 software from the Tools menu, choose
ControlFLASH.
• Choose Start>Programs>FLASH Programming Tools>
ControlFLASH.
The Welcome to ControlFLASH dialog box appears.
2. Click Next.
The Catalog Number dialog box appears.
Advertising