Rockwell Automation 2097-Vxxx Kinetix 350 Single-axis EtherNet/IP Servo Drive User Manual - Manual (Page 36)

36 Rockwell Automation Publication 2097-UM002C-EN-P - December 2013
Chapter 3 Kinetix 350 Drive Connector Data
Kinetix 350 Drive Connectors
and Indicators Although the physical size of the Kinetix 350 drives vary,
the location of the
connectors and indicators is identical.
Figure 10 - Kinetix 350 Drive Connector and Indicators
Table 10 - Kinetix 350 Drive Connectors
Item Description Item Description
1 Mains (IPD) connector 9 Motor feedback (MF) connector
2 Data status indicator and diagnostic display 10 Ground lug
3 Memory module socket 11 Shunt resistor and DC bus (BC) connector
4 Network status indicator 12 Back-up power (BP) connector
5 Module status indicator 13 Display control push buttons (3)
6 Axis status indicator 14 Motor power (MP) connector
7 Ethernet communication port (Port 1) 15 Safe torque-off (STO) connector
8 I/O (IOD) connector
10
3
4
2
5
6
7
9
8
1
12
13
11
14
15
10
0 3 5 0
Kinetix 350 Drive, Front View
(2097-V33PR5-LM drive is shown)
Kinetix 350 Drive, Bottom View
(2097-V33PR5-LM drive is shown)
Kinetix 350 Drive, Top View
(2097-V33PR5-LM drive is shown)
Designator Description Connector
IPD AC input power 3-position or 4-position plug/header
PORT1 Ethernet communication port RJ45 Ethernet
IOD I/O SCSI 50 pin high density connector
MF Motor feedback 15-pin high-density D-shell (male)
BP Back-up power 2-pin quick-connect terminal block
BC Shunt Resistor and DC Bus 7-pin quick-connect terminal block
MP Motor power 6-pin quick-connect terminal block
STO Safe torque off (STO) Terminal 6-pin quick-connect terminal block