Rockwell Automation 2097-Vxxx Kinetix 350 Single-axis EtherNet/IP Servo Drive User Manual User Manual
Page 99
Advertising
Rockwell Automation Publication 2097-UM002C-EN-P - December 2013
99
Configure and Start Up the Kinetix 350 Drive System Chapter 5
11. If the test fails, this dialog box appears.
a. Click OK.
b. Make an adjustment to motor velocity.
c. Refer to the appropriate Logix5000 motion module user manual for
more information.
and run the test again.
for each axis.
Advertising