Rockwell Automation 2097-Vxxx Kinetix 350 Single-axis EtherNet/IP Servo Drive User Manual - Manual (Page 57)

Rockwell Automation Publication 2097-UM002C-EN-P - December 2013 57
Connect the Kinetix 350 Drive System Chapter 4
Voiding of CE Compliance
The three-phase and neutral in-line filter applications described above are not
adequate for CE compliance for EMC. Therefore, EMC validity and CE
marking by Rockwell Automation is voided when three-phase and neutral in line
filters are used.
ATTENTION: The three-phase isolation transformer and neutral in-line filter
applications described in this document have not been tested for EMC by
Rockwell Automation and products used in such installations are not considered
CE marked by Rockwell Automation.
If this three-phase isolation transformer and neutral in-line filter application is
used, the responsibility for EMC validation lies with the user and CE marking of the
system becomes the user's responsibility.
If CE compliance is a customer requirement, use single-phase line filters that have
been tested by Rockwell Automation and specified for the product. Refer to Kinetix
Servo Drives Specifications Technical Data, publication
GMC-TD003 for catalog
numbers.