Rockwell Automation 2097-Vxxx Kinetix 350 Single-axis EtherNet/IP Servo Drive User Manual User Manual
Page 147
Advertising
Rockwell Automation Publication 2097-UM002C-EN-P - December 2013
147
Upgrade the Kinetix 350 Drive Firmware Appendix B
3. Select your drive module and click Next.
The Select Device to Update dialog box appears.
4. Expand your Ethernet node, Logix5000 backplane, and EtherNet/IP
network module.
5. Select the servo drive to upgrade and click OK.
The Firmware Revision dialog box appears.
6. Select the firmware revision to upgrade and click Next.
The Summary dialog box appears.
Advertising