Basler Electric DGC-2020ES - Manual (Page 18)

10 9469200990 Rev C
ALARMS-STATUS
● ACTIVE ALARMS
● ACTIVE PRE-ALARMS
● MTU FAULT CODES (Visible when ECU is configured for MTU MDEC, MTU ADEC, MTU ECU7/ECU8 or MTU
Smart Connect.)
● MTU STATUS (Visible when ECU is configured for MTU MDEC, MTU ADEC, MTU ECU7/ECU8, or MTU Smart
Connect.)
○ NMT-ALIVE STATUS (Visible when ECU is configured for MTU MDEC or MTU ECU7/ECU8.)
■ SPS_NODE
■ SW_TYP
■ SW_VAR
■ SW_ED1
■ SW_ED2
■ REV
■ SW_MOD
○ TRIP FUEL (Visible when ECU is configured for MTU ECU7/ECU8.)
■ TRIP HRS
■ TRIP IDLE HRS
■ FUEL RATE
■ TRIP FL RATE
■ TOTAL RUN TM
■ DAILY FUEL
■ TOTAL FUEL
○ FUEL (Visible when ECU is configured for MTU ADEC.)
■ DAY TANK LVL
■ STORE TANK LVL
○ ENGINE STATUS (Visible when ECU is configured for MTU ADEC, MTU ECU7/ECU8, or MTU Smart
Connect.)
■ MTU FAULT CODES
■ ENG RUNNING
■ CYL CUTOUT
■ ENG OPTIMIZED (Visible when ECU is configured for MTU ADEC or MTU ECU7/ECU8.)
■ PREHT NT RCHD (Visible when ECU is configured for MTU ADEC or MTU ECU7/ECU8.)
■ SPEC TORQUE (Visible when ECU is configured for MTU ADEC or MTU ECU7/ECU8.)
■ SPD DMD FL MD (Visible when ECU is configured for MTU ADEC.)
■ CURR P DEGREE (Visible when ECU is configured for MTU ADEC.)
■ LOAD GEN ON (Visible when ECU is configured for MTU ADEC, MTU ECU7/ECU8, or MTU
Smart Connect.)
■ PRIME PUMP ON (Visible when ECU is configured for MTU ADEC.)
■ RUNUP SPD LO (Visible when ECU is configured for MTU ADEC.)
■ IDLE SPD LO (Visible when ECU is configured for MTU ADEC.)
■ CYL CUTOUT CD (Visible when ECU is configured for MTU ECU7/ECU8.)
■ RPM (Visible when ECU is configured for MTU ECU7/ECU8.)
■ DROOP % (Visible when ECU is configured for MTU ECU7/ECU8 or MTU Smart Connect.)
■ ENG COOL TEMP (Visible when ECU is configured for MTU ECU7/ECU8.)
■ CHRG AIR TMP (Visible when ECU is configured for MTU ECU7/ECU8.)
■ INTRCOOLR TEMP (Visible when ECU is configured for MTU ECU7/ECU8.)
■ ENG OIL TEMP (Visible when ECU is configured for MTU ECU7/ECU8.)
■ FUEL TEMP (Visible when ECU is configured for MTU ECU7/ECU8.)
■ ECU TEMP (Visible when ECU is configured for MTU ECU7/ECU8.)
■ OIL PRESSURE (Visible when ECU is configured for MTU ECU7/ECU8.)
■ CHG AIR P (Visible when ECU is configured for MTU ECU7/ECU8.)
■ FUEL DELV P (Visible when ECU is configured for MTU ECU7/ECU8.)
■ FL RAIL P (Visible when ECU is configured for MTU ECU7/ECU8.)
■ CAMSHAFT RPM (Visible when ECU is configured for MTU ECU7/ECU8.)
■ IDLE RPM (Visible when ECU is configured for MTU ECU7/ECU8.)
■ ECU SHUTDOWN (Visible when ECU is configured for MTU ECU7/ECU8.)
■ TOTAL RUN TM (Visible when ECU is configured for MTU ECU7/ECU8.)
■ ECU SUPP VOLTS (Visible when ECU is configured for MTU ECU7/ECU8.)
■ INJCT DBR % (Visible when ECU is configured for MTU ECU7/ECU8.)
■ RATED RPM (Visible when ECU is configured for MTU ECU7/ECU8.)
■ INJCT QTY (Visible when ECU is configured for MTU ECU7/ECU8.)
■ RATED KW (Visible when ECU is configured for MTU ECU7/ECU8.)
Controls and Indicators DGC-2020ES