Basler Electric DGC-2020ES - Manual (Page 196)

188 9469200990 Rev C
Installation
Contact Expansion Modules are delivered in sturdy cartons to prevent shipping damage. Upon receipt of
a module, check the part number against the requisition and packing list for agreement. Inspect for
damage, and if there is evidence of such, immediately file a claim with the carrier and notify the Basler
Electric regional sales office or your sales representative.
If the device is not installed immediately, store it in the original shipping package in a moisture- and dust-
free environment.
Mounting
Contact Expansion Modules are contained in a potted plastic case and may be mounted in any
convenient position. The construction of a Contact Expansion Module is durable enough to mount directly
on a genset using ¼-inch hardware. Hardware selection should be based on any expected
shipping/transportation and operating conditions. The torque applied to the mounting hardware should not
exceed 65 in-lb (7.34 N•m).
See Figure 88 for CEM-2020 overall dimensions. All dimensions are shown in inches with millimeters in
brackets.
Figure 88. CEM-2020 Overall Dimensions
See Figure 89 for CEM-2020H overall dimensions. All dimensions are shown in inches with millimeters in
brackets.
CEM-2020 DGC-2020ES