Basler Electric DGC-2020ES - Manual (Page 21)

9469200990 Rev C 13
○ DESIRED SPEED
○ INJ CNTRL PRESS
○ INJ RAIL PRS
○ ENGINE HOURS
○ TRIP FUEL
○ TRIP AVE FL RT
○ TOTAL FUEL USED
○ ENG COOLANT TEMP
○ COOLNT PRHT DONE
○ FUEL TEMP
○ ENG OIL TEMP
○ ENG INTCLR TEMP
○ INTRCR CLNT LVL
○ FUEL DELV P
○ ENG OIL LEVEL
○ ENG OIL PRESS
○ COOLANT PRESS
○ COOLANT LEVEL
○ FUEL RATE
○ BAROMETRIC PRESS
○ AMB AIR TEMP
○ AIR INLET TEMP
○ BOOST PRESS
○ INTAK MNFLD TEMP
○ INTAK MNFLD1 ABS PRESS
○ AIR FLTR DIF PRS
○ EXHAUST GAS TEMP
○ BATTERY VOLTAGE
○ ECU INPUT VOLTS
○ TRANS OIL PRESS
○ TRANS OIL TEMP
○ WINDG 1 TEMP
○ WINDG 2 TEMP
○ WINDG 3 TEMP
○ ECU TEMP
○ AUX PRESSURE1
○ AUX PRESSURE2
○ RATED KW
○ RATED RPM
○ EXHAUST TMP A
○ EXHAUST TMP B
○ CHRG AIR TMP
○ FUEL 1 LEAK
○ FUEL 2 LEAK
○ ALARM RST FDBK
○ ECU SHUTDOWN
○ DEF TANK 1 LVL %
○ DEF TANK 2 LVL %
● J1939 ENGINE CONFIG (Visible when CAN bus is enabled and ECU is configured for Standard, Volvo Penta,
MTU ADEC, GM/Doosan, Cummins, or MTU Smart Connect.)
○ SPD @ IDLE PNT 1
○ TRQ @ IDLE PNT 1
○ SPD @ PNT 2
○ TRQ @ PNT 2
○ SPD @ PNT 3
○ TRQ @ PNT 3
○ SPD @ PNT 4
○ TRQ @ PNT 4
○ SPD @ PNT 5
○ TRQ @ PNT 5
○ SPD @ PNT 6
○ ENDSPEED GOV KP
○ REF ENG TORQUE
○ O-RIDE SPD PNT 7
○ O-RIDE TIME LMT
DGC-2020ES Controls and Indicators