Basler Electric DGC-2020ES - Manual (Page 212)

204 9469200990 Rev C
Fault
Code
Number
String Description
438 LO P FUEL RAIL 2 STR Low pressure on fuel rail 2.
439 HI P FUEL RAIL 2 STR Hi pressure on fuel rail 2.
440 AL L1 P AUX 1 Pressure input of Aux 1 injured limit 1.
441 AL RAIL 2 LEAKAGE STR Alarm fuel rail 2 leak detected.
442 AL L2 P AUX 1 Pressure input of Aux 1 injured limit 2.
443 HI P CHG MIX DIFF High Charge Mix Differential Pressure.
444 SD U PDU Sensor defect of Injector Power driver unit.
445 SD P AMBIENT AIR Ambient air pressure-sensor defect.
446 SD P HD2 Sensor Defect In HD 2 Pressure Sensor.
447 HIHI P CHG MIX DIFF Charge Mixture Differential Pressure High (Limit 2).
448 HI P CHARGE AIR Pressure of charge air too high (limit 1).
449 SS P CHARGE AIR Pressure of charge air too high (limit 2).
450 SD IDLE END TRQ IN Input of Idle/End-Torque defect
451 HI T CHARGE MIX High Charge Mixture Temperature (Limit 1).
452 HI HI T CHARGE MIX High Charge Mixture Temperature (Limit 2).
453 LO T CHARGE MIX Low Charge Mixture Temperature.
454 SS PWR RED ACT Power Reduction is activated.
455 AL L1 AUX1 PLANT Input of Aux 1 (plant) injured limit 1.
456 AL L2 AUX1 PLANT Input of Aux 1 (plant) injured limit 2.
457 LO T INTAKE AIR Low Intake Air Temperature (Limit 1).
458 LO LO T INTAKE AIR Low Intake Air Temperature (Limit 2).
459 SD P CLNT B ENG Sensor Defect In the Coolant Before Engine Pressure Sensor.
460 HI T EXHAUST EMU Exhaust gas temperature of EMU too high (limit 1).
461 LO T EXHAUST EMU Exhaust gas temperature of EMU too low (limit 1).
462 HI T COOLANT EMU Coolant temperature of EMU injured limit 1.
463 SD AUX 2 Sensor defect on Aux 2.
464 SD P AUX 1 Analog input for pressure Aux 1 defect.
465 SD P AUX 2 Sensor Defect in the Auxiliary 2 Pressure Sensor.
466 SD T AUX 2 Sensor Defect in the Auxiliary 2 Temperature Sensor.
467 AL L2 T AUX 1 Temperature input of Aux 1 injured limit 2.
468 SD T AUX 1 Analog input for Temperature Aux 1 defect.
469 SD AUX 1 Analog input for Aux 1 defect.
470 SD T ECU ECU temperature-sensor defect.
471 SD COIL CURRENT Coil Current sensor defect.
472 AL STOP SD Engine stop, because critical channel has sensor defect.
473 AL WIRING PWM CM2 Open load or short circuit on channel PWM CM2.
474 AL WIRING FREQ OUT Open load or short circuit on frequency output (FO) channel.
475 AL CR TRIG ENG ST Released in case of an engine stop in order to trigger the crash recorder.
476 AL CRASH REC ERR Initial error of crash recorder.
477 WRT MISTK BIN VAL Binary Data Write Error.
478 AL COMB ALM YEL Combined Alarm YELLOW (Plant).
479 AL COMB ALM RED Combined Alarm RED (Plant).
480 AL EXT ENG PROT External Engine Protection function active.
481 SD COIL CURRENT 2 Sensor Defect In Coil Current 2 Sensor.
482 SD T EXHAUST C Sensor Defect In Exhaust System C Temperature Sensor.
483 SD T EXHAUST D Sensor Defect In Exhaust System D Temperature Sensor.
484 HI T EXHAUST C High Exhaust C Temperature (Limit 1).
MTU Fault Codes DGC-2020ES