PLANET XGSW-28040HP - Manual (Page 163)

Command Guide of XGSW-28040HP
Usage Guide:
To configure Egress Tagging VLAN mode for specific interface
Example:
To configure Egress Tagging VLAN mode (None) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid egress-tag none
4.2.65.128 switchport hybrid ingress-filtering
Command:
switchport hybrid ingress-filtering
switchport Switching mode characteristics
hybrid Change PVID for hybrid port
ingress-filtering VLAN Ingress filter configuration
Default:
Enabled
Usage Guide:
To enable Ingress-filtering with Hybrid VLAN mode for specific interface
Example:
To enable Ingress-filtering with Hybrid VLAN mode for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid ingress-filtering
4.2.65.129 switchport hybrid native vlan
Command:
switchport hybrid native vlan <vlan_id>
switchport Switching mode characteristics
hybrid Change PVID for hybrid port
native Set native VLAN
vlan Set native VLAN when interface is in hybrid mode
<vlan_id> VLAN ID of the native VLAN when this port is in hybrid mode
-163-