PLANET XGSW-28040HP - Manual (Page 67)

Command Guide of XGSW-28040HP
Example:
To set timezone (GMT -15) with profile 1.
Switch# configure terminal
Switch (config)# clock timezone 1 -15
4.2.26 default access-list rate-limiter
Command:
default access-list rate-limiter <RateLimiterId : 1-16>
<RateLimiterId : 1-16> Rate limiter ID
Default:
0
Usage Guide:
To default the Rate limiter.
Example:
To default the Rate limiter ID 1.
Switch# configure terminal
Switch (config)# default access-list rate-limiter 1
4.2.27 dot1x authentication timer inactivity
Command:
dot1x authentication timer inactivity <10-1000000>
Default:
Aging period: 300
Usage Guide:
To set the Aging period for Network Access Server.
Example:
To set the Aging period (147 seconds).
Switch# configure terminal
-67-