PLANET XGSW-28040HP - Manual (Page 263)

Command Guide of XGSW-28040HP
4.2.160 mvr vlan <vlan_list> igmp-address
Command:
mvr vlan <vlan_list> igmp-address <ipv4_ucast>
mvr Multicast VLAN Registration configuration
vlan MVR multicast vlan
<vlan_list> MVR multicast VLAN list
igmp-address MVR address configuration used in IGMP
<ipv4_ucast> A valid IPv4 unicast address
Default:
0.0.0.0
Usage Guide:
To configure the MVR address of MVR VLAN
Example:
To configure the MVR address (192.168.0.55) of of MVR VLAN (123)
Switch# configure terminal
Switch (config)# mvr vlan 123 igmp-address 192.168.0.55
4.2.161 mvr vlan <vlan_list> last-member-query-interval
Command:
mvr vlan <vlan_list> last-member-query-interval <IpmcLmqi : 0-31744>
mvr Multicast VLAN Registration configuration
vlan MVR multicast vlan
<vlan_list> MVR multicast VLAN list
last-member-query-interval Last Member Query Interval in tenths of seconds
<IpmcLmqi : 0-31744> 0 - 31744 tenths of seconds
Default:
5
Usage Guide:
To configure the Last Member Query Interval of MVR VLAN
Example:
To configure the Last Member Query Interval (50 seconds) of MVR VLAN (123)
-263-