PLANET XGSW-28040HP - Manual (Page 222)

Command Guide of XGSW-28040HP
telnet : local
ssh : local
http : local
4.2.103.2 editing
Command:
editing
editing Enable command line editing
Default:
Enabled
Usage Guide:
To allow user editing command line.
Example:
To allow user editing command line.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# editing
4.2.103.3 end
Command:
end
end Go back to EXEC mode
Default:
None
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# line vty 1
-222-