PLANET XGSW-28040HP - Manual (Page 328)

Command Guide of XGSW-28040HP
4.3 copy
4.3.1 copy
Command:
copy { startup-config | running-config | <source_path> } { startup-config |
running-config | <destination_path> } [ syntax-check ]
copy Copy from source to destination
flash:filename | tftp://server/path-and-filename File in FLASH or on TFTP server
running-config Currently running configuration
startup-config Startup configuration Output modifiers
syntax-check Perform syntax check on source configuration
Default:
None
Usage Guide:
To copy configuration from source to destination
Example:
To copy configuration from source (running-config) to destination (startup-config)
Switch# copy running-config startup-config
4.4 debug
4.4.1 debug
Command:
debug prompt <debug_prompt>
debug Debugging functions
prompt Set prompt for testing
<debug_prompt> Word for prompt
Default:
None
Usage Guide:
To configure Description of Debug Prompt
-328-