PLANET XGSW-28040HP - Manual (Page 230)

Command Guide of XGSW-28040HP
4.2.107 lldp med location-tlv altitude
Command:
lldp med location-tlv altitude [floors <Meters or floors>] | [meters <Meters or floors>]
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv LLDP-MED Location Type Length Value parameter
altitude Altitude parameter
floors Specify the altitude in floor.
<Meters or floors> Altitude value.
meters Specify the altitude in meters.
Default:
0
Usage Guide:
To configure altitude of LLDP-MED
Example:
To configure altitude (Floors 5) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv altitude floors 5
4.2.108 lldp med location-tlv elin-addr
Command:
lldp med location-tlv elin-addr <ELIN number>
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv LLDP-MED Location Type Length Value parameter
elin-addr Emergency Location Identification Number, (e.g. E911 and others), such as defined by TIA or NENA.
<ELIN number> ELIN value
Default:
0
Usage Guide:
To configure Emergency Location Identification Number of LLDP-MED
Example:
To configure Emergency Location Identification Number (911) of LLDP-MED
-230-