PLANET XGSW-28040HP - Manual (Page 94)

Command Guide of XGSW-28040HP
4.2.65 interface * | 10GigabitEthernet | GigabitEthernet
Command:
interface * | 10GigabitEthernet <port_type_list> | GigabitEthernet <port_type_list>
* All switches or All ports
GigabitEthernet 1 Gigabit Ethernet Port
10GigabitEthernet 10 Gigabit Ethernet Port
Default:
N/A
Usage Guide:
To enter the interface mode.
Example:
To enter the interface 10GigabitEthernet 1/2
Switch# configure terminal
Switch (config)# interface 10GigabitEthernet 1/2
Switch (config-if) #
4.2.65.1 access-list action permit
Command:
access-list action permit
action Access list action
Default:
Permit
Usage Guide:
To configure Permit for the ACL action.
Example:
To configure Permit ACL action for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list action permit
-94-