PLANET XGSW-28040HP - Manual (Page 231)

Command Guide of XGSW-28040HP
Switch# configure terminal
Switch (config)# lldp med location-tlv elin-addr 911
4.2.109 lldp med location-tlv latitude
Command:
lldp med location-tlv latitude north <Degrees> | south <Degrees>
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv LLDP-MED Location Type Length Value parameter
latitude Latitude parameter
north Setting latitude direction to north.
south Setting latitude direction to south
<Degrees> Latitude degrees (0.0000-90.0000)
Default:
North, 0
Usage Guide:
To configure latitude direction of LLDP-MED
Example:
To configure latitude direction (south, 5) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv latitude south 5
4.2.110 lldp med location-tlv longitude
Command:
lldp med location-tlv longitude east <Degrees> | west <Degrees>
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv LLDP-MED Location Type Length Value parameter
longitude Longitude parameter
east Setting longitude direction to east.
west Setting longitude direction to west.
<Degrees> Longitude degrees (0.0000-180.0000)
-231-