PLANET XGSW-28040HP - Manual (Page 306)

Command Guide of XGSW-28040HP
Default:
Disabled
Usage Guide:
To configure Trap event of SNMP
Example:
To configure Trap event (STP, RMON) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# traps switch rmon stp
4.2.212.9 version
Command:
version { v1 [ <v1_comm> ] | v2 [ <v2_comm> ] | v3 [ probe | engineID
<v_word10_to_32> ] [ <securtyname> ] }
version Set SNMP trap version
v1 SNMP trap version 1
<V1Comm : word127> SNMP trap community
v2 SNMP trap version 2
<V2comm : word127> SNMP trap community
v3 SNMP trap version 3
<Securtyname : word32> seucrity name
engineID Configure trap server's engine ID
probe Probe trap server's engine ID
Default:
Disabled
Usage Guide:
To configure Version of SNMP
Example:
To configure Version (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# version v2 planet
-306-