PLANET XGSW-28040HP - Manual (Page 324)

Command Guide of XGSW-28040HP
snap-8021h SNAP OUI is 8021h
group Protocol-based VLAN group commands
<grp_id> Group Name (Range: 1 - 16 characters)
Default:
None
Usage Guide:
To configure the Protocol-based VLAN
Example:
To configure the Protocol-based VLAN (below table)
Switch# configure terminal
Switch (config)# vlan protocol llc 0x55 0x66 group 3
4.2.228 voice vlan
Command:
voice vlan
voice Voice appliance attributes
vlan Vlan for voice traffic
Default:
Disabled
Usage Guide:
To enable the Voice VLAN service
Example:
To enable the Voice VLAN service
Switch# configure terminal
Switch (config)# voice vlan
-324-