PLANET XGSW-28040HP - Manual (Page 266)

Command Guide of XGSW-28040HP
Usage Guide:
To default the function
Example:
To disable the function (loop-protect)
Switch# configure terminal
Switch (config)# no loop-protect
4.2.166 ntp
Command:
ntp
ntp Configure NTP
Default:
Disabled
Usage Guide:
To enable the NTP service
Example:
To enable the NTP service
Switch# configure terminal
Switch (config)# ntp
4.2.167 ntp server
Command:
ntp server <1-5> ip-address { <ipv4_var> | <ipv6_var> | <name_var> }
ntp Configure NTP
server Configure NTP server
<1-5> index number
<hostname> domain name
<ipv4_ucast> ipv4 address
<ipv6_ucast> ipv6 address
Default:
None
-266-