PLANET XGSW-28040HP - Manual (Page 23)

Command Guide of XGSW-28040HP
Figure 2-3 Hyper Terminal COM Port Configuration
You can change these settings, if desired, after you log on. This management method is often preferred because you can
remain connected and monitor the system during system reboots. Also, certain error messages are sent to the serial port,
regardless of the interface through which the associated action was initiated. A Macintosh or PC attachment can use any
terminal-emulation program for connecting to the terminal serial port. A workstation attachment under UNIX can use an
emulator such as TIP.
-23-