PLANET XGSW-28040HP - Manual (Page 277)

Command Guide of XGSW-28040HP
Example:
To enable the Port Aging
Switch# configure terminal
Switch (config)# port-security port-security aging
4.2.180 port-security aging time
Command:
port-security aging time <10-10000000>
port-security Enable/disable port security globally
aging Enable/disable port security aging
time Time in seconds between check for activity on learned MAC addresses
<10-10000000> seconds
Default:
3600
Usage Guide:
To configure the Aging Period of Port Security
Example:
To configure the Aging Period (159) of Port Security
Switch# configure terminal
Switch (config)# port-security aging time 159
4.2.181 privilege
Command:
privilege { exec | configure | config-vlan | line | interface | if-vlan | ipmc-profile |
snmps-host | stp-aggr | dhcp-pool | rfc2544-profile } level <privilege> <cmd>
privilege Command privilege parameters
config-vlan VLAN Configuration Mode
configure Global configuration mode
dhcp-pool DHCP Pool Configuration Mode
exec Exec mode
if-vlan VLAN Interface Mode
interface Port List Interface Mode
-277-