PLANET XGSW-28040HP - Manual (Page 380)

Command Guide of XGSW-28040HP
4.21.51 show ipmc profile
Command:
show ipmc profile [ <profile_name> ] [ detail ]
show Show running system information
ipmc IPv4/IPv6 multicast configuration
profile IPMC profile configuration
<ProfileName : word16> Profile name
detail Detail information of a profile
Default:
N/A
Usage Guide:
To display the IP Multicast Profile.
Example:
To display the IP Multicast Profile.
Switch # show ipmc profile
IPMC Profile is now enabled to start filtering.
Profile: 1 (In VER-INI Mode)
Description: test
4.21.52 show ipmc range
Command:
show ipmc range [ <entry_name> ]
show Show running system information
ipmc IPv4/IPv6 multicast configuration
range A range of IPv4/IPv6 multicast addresses for the profile
<EntryName : word16> Range entry name
Default:
N/A
Usage Guide:
To display the IP Multicast Range.
Example:
To display the IP Multicast Range.
-380-