PLANET XGS3-24040 - Manual (Page 101)

Chapter 11 LLDP Function Operation Configuration
11-3
5. Configure the aging time multiplier of LLDP messages
Command Explanation
Global Mode
lldp msgTxHold <value>
no lldp msgTxHold
Configure the aging time multiplier of
LLDP messages as the specified value or
default value.
6. Configure the sending delay of updating messages
Command Explanation
Global Mode
lldp transmit delay <seconds>
no lldp transmit delay
Configure the sending delay of updating
messages as the specified value or
default value.
7. Configure the intervals of sending Trap messages
Command Explanation
Global Mode
lldp notification interval <seconds>
no lldp notification interval
Configure the intervals of sending
Trap messages as the specified value or
default value.
8. Configure to enable the Trap function of the port
Command Explanation
Port Configuration Mode
lldp trap <enable|disable>
Enable or disable the Trap function of
the port.
9. Configure the optional information-sending attribute of the port
Command Explanation
Port Configuration Mode
lldp transmit optional tlv [portDesc]
[sysName] [sysDesc] [sysCap]
no lldp transmit optional tlv
Configure the optional
information-sending attribute of the port
as the option value of default values.
10. Configure the size of space to store Remote Table of the port
Command Explanation
Port Configuration Mode